NSN 83767

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

97403 document source, military drawing document type, government component document origin, 1 component document page number, dwg no. 13228e3767 document identification.

NSN 3835-01-303-1433 Datasheet

(NSN) National Stock Number

3835-01-303-1433

(FSG) Federal Supply Group

38 - Construction, Mining, Excavating, and Highway Maintenance Equipment

(FSC) Federal Supply Classification

3835 - Petroleum Production and Distribution Equipment

(NIIN) National Item Identification Number

01-303-1433

Requires Demilitarization

Yes

(INC) Item Name Code

16576

Date

Sun, Jun 25, 1989

Component Document Origin

government

Component Document Page Number

1

Document Identification

dwg no. 13228e3767

Document Source

97403

Document Type

military drawing

Nonsupply Items And Quantities

casing,insulator 14;bags,sand 300;culvert,nestable 5

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0016576

Cross Reference

CAGE Codes

97403

Cecom Lr Center

U.s./canadian manufacturers

41885

Hayes Wheels Intl Inc Akron Opns

U.s./canadian manufacturers

65614

Willbros Engineers, Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

EZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

92670

Water Commodity

576 - Metal and metal products, nos, (less than 35 feet)

National Motor Freight Classification Item Number

188560

Questions & Answers

1. What is the FSCG of the NSN 3835-01-303-1433?

   The FSCG of the NSN 3835-01-303-1433 is 3835

2. Does NSN 3835-01-303-1433 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 3835-01-303-1433 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 3835-01-303-1433 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 3835-01-303-1433 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Sun, Jun 25, 1989