NSN 8436309

A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. For an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. Excludes:printed circuit board

0.050 inches maximum actuator height, round actuator style, 0.078 inches nominal actuator diameter, 0.050 pretravel inches maximum and 0.003 overtravel inches minimum and 0.004 differential inches maximum actuator movement, 0.475 inches nominal actuator free position height.

NSN 5930-00-917-7083 Datasheet

(NSN) National Stock Number

5930-00-917-7083

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-917-7083

Requires Demilitarization

Yes

(INC) Item Name Code

00399

Date

Wed, Aug 3, 1966

Schedule B Code

8536509050

Actuator Height

0.050 inches maximum

Actuator Diameter

0.078 inches nominal

Actuator Free Position Height

0.475 inches nominal

Actuator Style

round

Actuator Movement

0.050 pretravel inches maximum and 0.003 overtravel inches minimum and 0.004 differential inches maximum

Body Height

0.600 inches nominal

Body Length

0.876 inches nominal

Body Width

0.346 inches nominal

Body Style

hole mounted

Center To Center Distance Between Mounting Facilities Parallel To Length

0.375 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

4.000 amperes resistive dc and 3.000 amperes inductive dc

Features Provided

actuator seal

Hazardous Locations/Environmental Protection

corrosion resistant

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

28.0 dc

Mounting Method

unthreaded hole(s)

Nonpile-Up Contact Arrangement

unable to decode

Overall Height

0.605 inches nominal

Overall Length

0.876 inches nominal

Overall Width

0.346 inches nominal

Switch Release Force

4.0 ounces minimum

Switch Actuating Force

5.0 ounces minimum and 7.0 ounces maximum

Terminal Type And Quantity

2 wire lead

Test Data Document

19204-8436309 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Unthreaded Mounting Hole Diameter

0.088 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000399

Cross Reference

CAGE Codes

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

91929

Honeywell International Inc. Dba Honeyweel Sensing & Controls

U.s./canadian manufacturers

F3767

Sef Power

Non-us manufacturer (nato), other foreign organization or codification bureaus

K0577

British Sarozal Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

19204

Army, United States Department of the Dba Rock Island Arsenal Jmtc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9050

Description

switches, slide, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-917-7083?

   The FSCG of the NSN 5930-00-917-7083 is 5930

2. Does the NSN 5930-00-917-7083 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509050

3. Does NSN 5930-00-917-7083 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-917-7083 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-917-7083 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-917-7083 was assigned to the Federal Catalog?

   It was assigned 60 years ago, on Wed, Aug 3, 1966