NSN 844218

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.0468 inches nominal both ends0.0468 inches nominal both ends hook radius, eye loop both endseye loop both ends end style, left-handleft-hand coil helix direction, 88 coil quantity, closedclosed design type.

NSN 5360-00-511-4182 Datasheet

(NSN) National Stock Number

5360-00-511-4182

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5360 - Coil, Flat, Leaf and Wire Springs

(NIIN) National Item Identification Number

00-511-4182

Requires Demilitarization

Yes

(INC) Item Name Code

04227

Date

Tue, Jan 1, 1963

Coil Helix Direction

left-handleft-hand

Coil Quantity

88

Design Type

closedclosed

End Style

eye loop both endseye loop both ends

Hook Radius

0.0468 inches nominal both ends0.0468 inches nominal both ends

Inside Diameter

0.0737 inches nominal0.0737 inches nominal

Material

steel overallsteel overall

Spring Deflection Rate

1.813 pounds per inch nominal1.813 pounds per inch nominal

Spring Free Length

0.3325 inches nominal0.3325 inches nominal

Spring Free Outside Diameter

0.0937 inches nominal0.0937 inches nominal

Style Designator

cylindricalcylindrical

Surface Treatment

cadmium overallcadmium overall

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

FPZ - San antonio air logistics center kelly afb, texas 78241-5000

Pseudo Item Name Code

0004227

Cross Reference

CAGE Codes

64547

Honeywell International, Inc Div Aerospace-Tucson

U.s./canadian manufacturers

83298

Allied Signal Inc Aerospace Equipment Systems Eatontown Site

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 5360-00-511-4182?

   The FSCG of the NSN 5360-00-511-4182 is 5360

2. Does NSN 5360-00-511-4182 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5360-00-511-4182 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5360-00-511-4182 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5360-00-511-4182 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963