NSN 8519630-2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

150.0 milliamperes resistive load ac at sea levelunable to decode contact load current rating, 200.0 milliamperes resistive load dc at altitude contact load current rating, 150.0 milliamperes resistive load ac at sea level contact load current rating, 200.0 milliamperes resistive load and 30.0 milliamperes inductive load and 100.0 milliamperes inductive load dc at sea level contact load current rating, 150.0 milliamperes resistive load ac at altitude contact load current rating.

NSN 5930-01-462-5962 Datasheet

(NSN) National Stock Number

5930-01-462-5962

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-462-5962

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Feb 9, 1999

Schedule B Code

8536509020

Contact Load Current Rating

150.0 milliamperes resistive load ac at altitude

Contact Load Current Rating

150.0 milliamperes resistive load ac at sea level

Contact Load Current Rating

150.0 milliamperes resistive load ac at sea levelunable to decode

Contact Load Current Rating

200.0 milliamperes resistive load and 30.0 milliamperes inductive load and 100.0 milliamperes inductive load dc at sea level

Contact Load Current Rating

200.0 milliamperes resistive load dc at altitude

Contact Voltage Rating In Volts

115.0 ac at altitude

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at altitude

Contact Voltage Rating In Volts

28.0 dc at sea level

First Flat Length

0.370 inches nominal single actuator

Flat Height

0.216 inches nominal single actuator

Individual Section Quantity

1

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Type

flatted bushing at 9:00 oclock

Nonturn Device Type

flatted bushing at 1:45 oclock

Overall Diameter

0.500 inches nominal

Overall Length

1.438 inches nominal

Pole Quantity

1 single section front

Shaft Diameter

0.250 inches nominal single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.625 inches nominal single actuator

Style Designator

snap or line

Switch Actuator Indexing Position Quantity

6 single actuator

Switch Actuator Positioning Increment

45.0 degrees first actuator

Switch Actuator Positioning Increment

45.0 degrees first actuatorunable to decode

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.250 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

6 single section front

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

31946

Cole Instrument Corp. Dba Cole Instruments

U.s./canadian manufacturers

07187

Honeywell International Inc. Dba Honeywell International Div Aerospace - Deer Valley Oem

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-462-5962?

   The FSCG of the NSN 5930-01-462-5962 is 5930

2. Does the NSN 5930-01-462-5962 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-462-5962 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-462-5962 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-462-5962 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-462-5962 was assigned to the Federal Catalog?

   It was assigned 27 years ago, on Tue, Feb 9, 1999