NSN 853267

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

5.500 inches nominal body length, unable to decode center to center distance between mounting facilities parallel to length, unable to decode center to center distance between mounting facilities parallel to width, 6.750 inches nominal body height, 4.500 inches nominal body width.

NSN 5950-00-934-2701 Datasheet

(NSN) National Stock Number

5950-00-934-2701

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-934-2701

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Wed, Mar 1, 1967

Body Height

6.750 inches nominal

Body Length

5.500 inches nominal

Body Width

4.500 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Frequency Rating

Inclosure Type

hermetically sealed with oil

Input-Output Phase Relationship

unable to decode

Mounting Facility Quantity

unable to decode

Mounting Method

unable to decode

Nominal Thread Size

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

8 pin

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Winding Function And Quantity

Winding Operating Current

unable to decode

Winding Operating Voltage

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

06141

L3 Aviation Products, Inc. Dba L3 Technologies

U.s./canadian manufacturers

51181

Keytronics, Inc. Div Api Technologies Corp- Magnetics

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-934-2701?

   The FSCG of the NSN 5950-00-934-2701 is 5950

2. Does NSN 5950-00-934-2701 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-00-934-2701 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5950-00-934-2701 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-00-934-2701 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Wed, Mar 1, 1967