NSN 859629

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

radial load direction, contact bearing seal type, 0.2785 inches minimum and 0.2810 inches maximum inner ring width, mil-g-81322 mil spec single material response lubrication material document and classification, 0.7495 inches minimum and 0.7500 inches maximum bore diameter.

NSN 3110-01-069-2768 Datasheet

(NSN) National Stock Number

3110-01-069-2768

(FSG) Federal Supply Group

31 - Bearings

(FSC) Federal Supply Classification

3110 - Unmounted Antifriction Bearings

(NIIN) National Item Identification Number

01-069-2768

Requires Demilitarization

Yes

(INC) Item Name Code

00041

Date

Tue, Dec 12, 1978

Schedule B Code

8482105068

Bearing Seal Type

contact

Bore Diameter

0.7495 inches minimum and 0.7500 inches maximum

Inner Ring Width

0.2785 inches minimum and 0.2810 inches maximum

Load Direction

radial

Lubrication Material Document And Classification

mil-g-81322 mil spec single material response

Lubrication Material

grease

Material Document And Classification

66 fed std single material response ball

Material Document And Classification

66 fed std single material response inner ring

Material Document And Classification

66 fed std single material response outer ring

Material Document And Classification

ams 3652 assn std single material response seal

Material

plastic polytetrafluoroethylene seal

Material

steel comp e52100 ball

Material

steel comp e52100 outer ring

Material

steel comp e52100 inner ring

Outer Ring Width

0.2450 inches minimum and 0.2500 inches maximum

Overall Outside Diameter

1.1870 inches minimum and 1.1875 inches maximum

Special Features

80 pct full of specified lubricant,heat stabilized for continuous operation at 250 deg f,all external surfaces except bore and seal retainers cadmium plated per qq-p-416,type 1,class 2

Seal Quantity

2

Style Designator

single row inner ring extended both sides

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0000041

Cross Reference

CAGE Codes

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

36378

Raytheon Technical Services Company

U.s./canadian manufacturers

06144

Industrial Tectonics Bearings Corporation Dba Rbc Bearings Inc Div Industrial Tectonics Bearings

U.s./canadian manufacturers

21335

Timken Co Div the Timken Company

U.s./canadian manufacturers

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

81343

Society of Automotive Engineers Inc

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58860

Water Commodity

742 - Bearings

National Motor Freight Classification Item Number

114820

Schedule B & Trade

Schedule B

8482-10-5068

Description

ball bearings, nesoi

End Use

21180 - Industrial machines, other

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

74610

(NAICS) North American Industrial Classification System

332991

Questions & Answers

1. What is the FSCG of the NSN 3110-01-069-2768?

   The FSCG of the NSN 3110-01-069-2768 is 3110

2. Does the NSN 3110-01-069-2768 have a Schedule B code assigned?

   Yes, the Schedule B code is 8482105068

3. Does NSN 3110-01-069-2768 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 3110-01-069-2768 contain precious materials?

   Precious metal content is unknown

5. Does NSN 3110-01-069-2768 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 3110-01-069-2768 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Tue, Dec 12, 1978