NSN 8858K53

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

down position momentary and center position maintained actuator position-action relationship, round actuator style, down position no locking action and center position locked in actuator position-locking relationship, 0.430 inches maximum actuator diameter, 1.082 inches nominal actuator height.

NSN 5930-00-286-4133 Datasheet

(NSN) National Stock Number

5930-00-286-4133

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-286-4133

Requires Demilitarization

Yes

(INC) Item Name Code

00184

Date

Wed, Sep 5, 1973

Schedule B Code

8536509065

Actuator Height

1.082 inches nominal

Actuator Diameter

0.430 inches maximum

Actuator Position-Action Relationship

down position momentary and center position maintained

Actuator Position-Locking Relationship

down position no locking action and center position locked in

Actuator Style

round

Body Length

1.346 inches maximum

Body Style

bushing mount

Bushing Length

0.437 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

18.000 amperes resistive dc and 10.000 amperes inductive dc and 5.000 amperes lamp dc and 11.000 amperes resistive ac and 8.000 amperes inductive ac and 2.000 amperes lamp ac

Features Provided

actuator seal

Hazardous Locations/Environmental Protection

watertight

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

115.0 ac and 28.0 dc

Mounting Method

threaded bushing

Mounting Surface To Terminal End Distance

1.250 inches maximum

Nominal Thread Size

0.469 inches

Nonpile-Up Contact Arrangement

2 pole, single throw, normally open, momentary action single switch unit

Overall Height

2.769 inches nominal

Overall Length

1.346 inches maximum

Overall Width

1.025 inches maximum

Specification/Standard Data

96906-ms25126 government standard

Terminal Type And Quantity

4 tab w/screw

Test Data Document

"81349-mil-dtl-83731 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Quantity Per Inch

32

Thread Series Designator

uns

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000184

Cross Reference

CAGE Codes

15605

Eaton Corp Opns & Technical Center

U.s./canadian manufacturers

81640

Safran Power Usa, Llc

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-286-4133?

   The FSCG of the NSN 5930-00-286-4133 is 5930

2. Does the NSN 5930-00-286-4133 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-00-286-4133 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-286-4133 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-00-286-4133 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-286-4133 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Wed, Sep 5, 1973