NSN 88V

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

1.062 inches nominal length, 0.656 inches nominal distance from loop center to end, 0.875 inches minimum and 1.250 inches maximum loop/holding dimension, cushion features provided, 0.187 inches nominal hole diameter.

NSN 5340-01-005-3118 Datasheet

(NSN) National Stock Number

5340-01-005-3118

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-005-3118

Requires Demilitarization

Yes

(INC) Item Name Code

20815

Date

Mon, Jun 23, 1975

Schedule B Code

7326908630

Distance From Loop Center To End

0.656 inches nominal

Features Provided

cushion

Hole Diameter

0.187 inches nominal

Length

1.062 inches nominal

Loop/Holding Dimension

0.875 inches minimum and 1.250 inches maximum

Material

unable to decode

Mounting Method

unthreaded hole(s)

Overall Height

1.312 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020815

Cross Reference

CAGE Codes

28638

Naval Air Warfare Center Aircraft Division Code 1.3.1 Bldg 562-1

U.s./canadian manufacturers

89536

Fluke Corp

U.s./canadian manufacturers

92026

Arthur I Platt Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49780

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094220

Schedule B & Trade

Schedule B

7326-90-8630

Description

hangers and similar supports for tubes and pipes, of iron or steel

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69969

(NAICS) North American Industrial Classification System

332999

Questions & Answers

1. What is the FSCG of the NSN 5340-01-005-3118?

   The FSCG of the NSN 5340-01-005-3118 is 5340

2. Does the NSN 5340-01-005-3118 have a Schedule B code assigned?

   Yes, the Schedule B code is 7326908630

3. Does NSN 5340-01-005-3118 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-005-3118 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-01-005-3118 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-005-3118 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Mon, Jun 23, 1975