NSN 890624REVB

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

0.930 inches maximum body length, 2.120 inches maximum body outside diameter, frequency rating, unable to decode coil form type, unable to decode inductance rating.

NSN 5950-00-331-9611 Datasheet

(NSN) National Stock Number

5950-00-331-9611

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-331-9611

Requires Demilitarization

Yes

(INC) Item Name Code

00777

Date

Sun, Dec 16, 1973

Schedule B Code

8548900100

Body Length

0.930 inches maximum

Body Outside Diameter

2.120 inches maximum

Coil Form Type

unable to decode

Frequency Rating

Inductance Rating

unable to decode

Inclosure Type

fully inclosed

Mounting Method

unable to decode

Rating Method

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

3 wire lead

Turn Quantity

unable to decode

Winding Conductor Size

unable to decode

Winding Function And Quantity

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000777

Cross Reference

CAGE Codes

53711

Naval Sea Systems Command

U.s./canadian manufacturers

80249

Bae Systems Information and Electronic Systems Integration Inc.

U.s./canadian manufacturers

29525

Hytronics Corp.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-331-9611?

   The FSCG of the NSN 5950-00-331-9611 is 5950

2. Does the NSN 5950-00-331-9611 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-00-331-9611 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-331-9611 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-331-9611 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-331-9611 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Sun, Dec 16, 1973