NSN 89173011

A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. See also locknut, tube fitting. For items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

breaks before makes second section rear contact switching action, makes before breaks first section front contact switching action, 1.0 amperes resistive load ac at sea level contact load current rating, makes before breaks second section front contact switching action, 2.0 amperes resistive load dc at sea level contact load current rating.

NSN 5930-00-121-1809 Datasheet

(NSN) National Stock Number

5930-00-121-1809

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-121-1809

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Wed, Oct 23, 1968

Schedule B Code

8536509020

Contact Load Current Rating

1.0 amperes resistive load ac at sea level

Contact Load Current Rating

2.0 amperes resistive load dc at sea level

Contact Switching Action

breaks before makes second section rear

Contact Switching Action

makes before breaks first section front

Contact Switching Action

makes before breaks second section front

Contact Switching Action

makes before breaks first section rear

Contact Voltage Rating In Volts

110.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

First Flat Length

0.312 inches nominal single actuator

Flat Height

0.218 inches nominal single actuator

Hazardous Locations/Environmental Protection

corrosion resistant

Individual Section Quantity

2

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.531 inches nominal at 10:30 oclock

Nonturn Device Type

tab at 10:30 oclock

Operating Temp Range

-65.0 to 85.0 celsius

Overall Height

1.625 inches nominal

Overall Length

2.065 inches nominal

Overall Width

1.312 inches nominal

Pole Quantity

2 each section front

Pole Quantity

2 each section rear

Precious Material And Location

contacts and rotor blades silver

Precious Material

silver

Shaft Diameter

0.250 inches nominal single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.469 inches nominal single actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

4 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

clip

Thread Class

2a single mounting facility

Thread Length

0.187 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

2 first section front

Throw Quantity

2 first section rear

Throw Quantity

2 second section rear

Throw Quantity

1 second section front

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

76854

Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch

U.s./canadian manufacturers

88769

Wiltek Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-121-1809?

   The FSCG of the NSN 5930-00-121-1809 is 5930

2. Does the NSN 5930-00-121-1809 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-121-1809 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-121-1809 contain precious materials?

   Item contains silver.

5. Does NSN 5930-00-121-1809 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-121-1809 was assigned to the Federal Catalog?

   It was assigned 57 years ago, on Wed, Oct 23, 1968