NSN 8A64

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2.187 inches minimum and 2.312 inches maximum body length, unable to decode center to center distance between mounting facilities parallel to width, 1.937 inches minimum and 2.062 inches maximum body width, 3.000 inches minimum and 3.125 inches maximum body height, unable to decode center to center distance between mounting facilities parallel to length.

NSN 5950-00-646-3594 Datasheet

(NSN) National Stock Number

5950-00-646-3594

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-646-3594

Requires Demilitarization

Yes

(INC) Item Name Code

00780

Date

Tue, Jan 1, 1963

Schedule B Code

8548900100

Body Height

3.000 inches minimum and 3.125 inches maximum

Body Length

2.187 inches minimum and 2.312 inches maximum

Body Width

1.937 inches minimum and 2.062 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Frequency Rating

Inclosure Type

hermetically sealed

Mounting Facility Quantity

unable to decode

Mounting Method

unable to decode

Nominal Thread Size

unable to decode

Overall Height

4.000 inches maximum

Primary To Secondary Turn Ratio

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

5 standoff, solder lug

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Transformer Function

input

Winding Function And Quantity

Winding Operating Current

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000780

Cross Reference

CAGE Codes

03538

Lockheed Martin Corporation Div Rms

U.s./canadian manufacturers

24446

General Electric Company

U.s./canadian manufacturers

80089

Emerson Electric Co White-Rodgers Div

U.s./canadian manufacturers

04009

Cooper Industries Inc Cooper Distribution Equipment Div

U.s./canadian manufacturers

1L8V1

Magnetika Inc Div Magnetika/phillipsburg Location

U.s./canadian manufacturers

53342

Opt Industries Inc Div of Electronika Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-646-3594?

   The FSCG of the NSN 5950-00-646-3594 is 5950

2. Does the NSN 5950-00-646-3594 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-00-646-3594 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-646-3594 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-646-3594 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-646-3594 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963