NSN 8B136

An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). Excludes:terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. For items having printed electrical conductor paths, see printed wiring board.

1.125 inches nominal body length, w/o mtg facilities, axial terminals body style, 0.390 microfarads single section capacitance value per section, plastic polyethylene terephthalate (pet) dielectric material, 0.468 inches nominal body diameter.

NSN 5910-00-889-4451 Datasheet

(NSN) National Stock Number

5910-00-889-4451

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-889-4451

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Mon, Jan 1, 1962

Schedule B Code

8532250080

Body Diameter

0.468 inches nominal

Body Length

1.125 inches nominal

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

0.390 microfarads single section

Dielectric Material

plastic polyethylene terephthalate (pet)

Internal Electrical Connection Type

extended foil

Insulation Resistance At Maximum Operating Temp

500.0 megohm-microfarads

Insulation Resistance At Reference Temp

100000.0 megohm-microfarads

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

100.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Length

1.625 inches minimum

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-20.00 to 20.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

84411

American Shizuki Corp

U.s./canadian manufacturers

0ZBJ4

Philips North America Llc Dba Philips Healthcare

U.s./canadian manufacturers

52983

Hewlett-Packard Co Waltham Div

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-889-4451?

   The FSCG of the NSN 5910-00-889-4451 is 5910

2. Does the NSN 5910-00-889-4451 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-889-4451 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-889-4451 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-889-4451 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-889-4451 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962