NSN 9-314

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

frequency rating, center to center distance between mounting facilities parallel to length, center to center distance between mounting facilities parallel to width, 0.830 inches maximum body height, unable to decode impedance rating in ohms.

NSN 5950-01-307-2432 Datasheet

(NSN) National Stock Number

5950-01-307-2432

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-307-2432

Requires Demilitarization

Yes

(INC) Item Name Code

00780

Date

Fri, Sep 8, 1989

Schedule B Code

8548900100

Body Height

0.830 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Length

Center To Center Distance Between Mounting Facilities Parallel To Width

Frequency Rating

Impedance Rating In Ohms

unable to decode

Inclosure Type

fully inclosed

Mounting Facility Quantity

unable to decode

Mounting Hole Diameter

Mounting Method

unable to decode

Overall Length

1.400 inches nominal

Overall Width

0.860 inches minimum and 0.900 inches maximum

Reliability Indicator

not established

Terminal Type And Quantity

4 tab, solder lug

Test Data Document

81755-c10961 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Winding Function And Quantity

Winding Operating Current

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000780

Cross Reference

CAGE Codes

52797

Automation Products Group, Inc.

U.s./canadian manufacturers

81755

Lockheed Martin Corporation Div Lockheed Martin Aeronautics Company

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-01-307-2432?

   The FSCG of the NSN 5950-01-307-2432 is 5950

2. Does the NSN 5950-01-307-2432 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-01-307-2432 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-307-2432 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5950-01-307-2432 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-307-2432 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Fri, Sep 8, 1989