NSN 9012030

one hole first leg hole arrangement style, 0.125 inches nominal first leg corner radius, 90.0 degrees nominal first leg angle, 0.192 inches minimum and 0.203 inches maximum first leg hole diameter, 0.391 inches minimum and 0.422 inches maximum first leg distance from edge to hole center along width.

NSN 5340-00-725-2995 Datasheet

(NSN) National Stock Number

5340-00-725-2995

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-725-2995

Requires Demilitarization

Yes

(INC) Item Name Code

16900

Date

Tue, Jan 1, 1963

First Leg Angle

90.0 degrees nominal

First Leg Corner Radius

0.125 inches nominal

First Leg Distance From Edge To Hole Center Along Width

0.391 inches minimum and 0.422 inches maximum

First Leg Hole Arrangement Style

one hole

First Leg Hole Diameter

0.192 inches minimum and 0.203 inches maximum

First Leg Distance From Edge To Hole Center Along Length

0.234 inches minimum and 0.266 inches maximum

First Leg Style

corner radius

First Leg Thickness

0.109 inches minimum and 0.141 inches maximum

First Leg Width

0.797 inches minimum and 0.828 inches maximum

First Leg Length

1.109 inches minimum and 1.141 inches maximum

Heat Treatment

t-4 solution heat treated

Second Leg Corner Radius

0.125 inches nominal

Second Leg Distance Between Hole Centers Along Width

0.422 inches minimum and 0.453 inches maximum

Second Leg Hole Arrangement Style

two holes

Second Leg Hole Diameter

0.138 inches nominal

Second Leg Length

0.484 inches minimum and 0.516 inches maximum

Second Leg Distance From Edge To Hole Center Along Length

0.234 inches minimum and 0.266 inches maximum

Second Leg Distance From Edge To Hole Center Along Width

0.172 inches minimum and 0.203 inches maximum

Second Leg Thickness

0.109 inches minimum and 0.141 inches maximum

Second Leg Width

0.797 inches minimum and 0.828 inches maximum

Second Leg Style

corner radius

Style Designator

angle

Surface Treatment Document And Classification

mil-a-8625 mil spec single treatment response

Surface Treatment

anodize

Special Features

threaded holes in second leg

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9I - Defense industrial supply center philadelphia, pennsylvania 19111

Pseudo Item Name Code

0016900

Cross Reference

CAGE Codes

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-00-725-2995?

   The FSCG of the NSN 5340-00-725-2995 is 5340

2. Does NSN 5340-00-725-2995 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-725-2995 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-00-725-2995 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-725-2995 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963