Cross Reference

These part numbers have the same form, fit, and function of 901323-8

Item Number	Cage
901323-8	76301
B5280-8	29593

Characteristic Codes

901323-8 spec. code meanings

Code	Translation
AAGT	A measurement of the smallest dimension of the wall, in distinction from length or width.
AAWN	The physical configuration of the body when viewed in cross section.
ABHP	The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
ADVN	A measurement from the bottom to the top of a cross section, in distinction from depth.
ADWH	A measurement of the cross section taken at right angles to the length, in distinction from thickness.
CQCF	The structural characteristic of the item.
FEAT	Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
MATT	The chemical compound or mechanical mixture properties of which the item is fabricated.
MDCL	The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
SFTT	The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
STDC	The specification, standard, or manufacturers reference, and the classification designation, such as type, class, grade, and the like, that identifies the surface treatment material.

Specification

Length: 7-13/64", copper alloy

Technical Definition

Bus, Conductor, also referenced with federal logistics item name code 32758 - An item made of rigid or semirigid conductive material, usually employed in the distribution of heavy electrical current. it is cut to specific lengths and is shaped, drilled, tapped or otherwise terminated. it may be fabricated in any of various cross-sectional shapes and sizes and may include terminal lugs. it may be designed to connect two or more screw or stud terminations. excludes terminal strip, grounding.