NSN 9022DC

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.245 inches minimum and 0.271 inches maximum body width, monolithic and hermetically sealed and asynchronous and edge triggered and high speed and positive outputs and synchronous and w/clear and w/enable features provided, 0.750 inches minimum and 0.785 inches maximum body length, 0.140 inches minimum and 0.180 inches maximum body height, 2 flip-flop, j-k, clocked and 2 flip-flop, j-k, master slave design function and quantity.

NSN 5962-00-172-3185 Datasheet

(NSN) National Stock Number

5962-00-172-3185

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5962 - Electronic Microcircuits

(NIIN) National Item Identification Number

00-172-3185

Requires Demilitarization

Yes

(INC) Item Name Code

31779

Date

Sun, Aug 27, 1972

Schedule B Code

8542900000

Body Height

0.140 inches minimum and 0.180 inches maximum

Body Length

0.750 inches minimum and 0.785 inches maximum

Body Width

0.245 inches minimum and 0.271 inches maximum

Design Function And Quantity

2 flip-flop, j-k, clocked and 2 flip-flop, j-k, master slave

Features Provided

monolithic and hermetically sealed and asynchronous and edge triggered and high speed and positive outputs and synchronous and w/clear and w/enable

Inclosure Configuration

dual-in-line

Inclosure Material

ceramic and glass

Input Circuit Pattern

10 input

Maximum Power Dissipation Rating

210.0 milliwatts

Operating Temp Range

+0.0 to 75.0 celsius

Output Logic Form

transistor-transistor logic

Storage Temp Range

-65.0 to 150.0 celsius

Time Rating Per Chacteristic

20.00 nanoseconds maximum propagation delay time, low to high level output and 35.00 nanoseconds maximum propagation delay time, high to low level output

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0031779

Cross Reference

CAGE Codes

07263

Fairchild Semiconductor Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HY -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

5 - Low sensitivity, category iv, aa&e, unclassified

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

34580

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

8542-90-0000

Description

electronic integrated circuits and microassembly parts

End Use

21320 - Semiconductors

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77689

(NAICS) North American Industrial Classification System

334413

Questions & Answers

1. What is the FSCG of the NSN 5962-00-172-3185?

   The FSCG of the NSN 5962-00-172-3185 is 5962

2. Does the NSN 5962-00-172-3185 have a Schedule B code assigned?

   Yes, the Schedule B code is 8542900000

3. Does NSN 5962-00-172-3185 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5962-00-172-3185 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5962-00-172-3185 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5962-00-172-3185 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Sun, Aug 27, 1972