NSN 9027033

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

10.375 inches nominal length, 4.625 inches nominal bend radius, qq-s-698, cond hrcq fed spec single material response material document and classification, plain end end style, u bend basic shape style.

NSN 5340-00-435-2467 Datasheet

(NSN) National Stock Number

5340-00-435-2467

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-435-2467

Requires Demilitarization

Yes

(INC) Item Name Code

20318

Date

Mon, Mar 17, 1969

Basic Shape Style

u bend

Bend Radius

4.625 inches nominal

End Style

plain end

Length

10.375 inches nominal

Material Document And Classification

qq-s-698, cond hrcq fed spec single material response

Material

steel or steel comp 1008 or steel comp 1009 or steel comp 1015 or steel comp 1018 or steel comp 1020

Short Leg Overall Length

5.000 inches nominal

Special Features

three holes 0.339 in. dia to 0.353 in. dia

Thickness

0.062 inches nominal

Width

0.814 inches minimum and 0.938 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0020318

Cross Reference

CAGE Codes

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-00-435-2467?

   The FSCG of the NSN 5340-00-435-2467 is 5340

2. Does NSN 5340-00-435-2467 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-435-2467 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-435-2467 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-435-2467 was assigned to the Federal Catalog?

   It was assigned 57 years ago, on Mon, Mar 17, 1969