NSN 903898

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

metal body material, 0.800 inches nominal body width, f16aircombfit end item identification, 2.050 inches nominal body length, 0.500 inches nominal body height.

NSN 5915-01-269-0881 Datasheet

(NSN) National Stock Number

5915-01-269-0881

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

01-269-0881

Requires Demilitarization

Yes

(INC) Item Name Code

00209

Date

Fri, Dec 11, 1987

Schedule B Code

8527995030

End Item Identification

f16aircombfit

Body Height

0.500 inches nominal

Body Length

2.050 inches nominal

Body Material

metal

Body Width

0.800 inches nominal

Discrimination At Specified Frequencies Per Function In Decibels

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.628 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.878 inches nominal

Frequency Band Width Per Function

5.00 gigahertz blank and 8.00 gigahertz blank

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

encased

Input Terminal Identification

sma-receptacle

Input Terminal Manufacturer Code

12436

Insertion Loss At Reference Frequency Per Function In Decibels

1.0 blank

Load Impedance Per Function

50.0 ohms blank

Mounting Facility Screw Thread Series Designator

unf

Mounting Facility Type And Quantity

4 threaded hole(s)

Nominal Thread Size

0.060 inches

Operating Temp Range

-55.0 to 85.0 celsius

Output Terminal Identification

sma-receptacle

Output Terminal Manufacturer Code

12436

Overall Length

2.550 inches nominal

Principal Circuitry Type Per Function

inductance-capacitance blank

Reference Frequency Per Function

6.5 gigahertz blank

Source Impedance Rating Per Function

50.0 ohms blank

Specified Frequencies Of Discrimination Per Function

4.00 gigahertz blank and 5.00 gigahertz blank and 8.00 gigahertz blank and 9.30 gigahertz blank

Style Designator

rectangular terminal/terminals on opposite surfaces

Vibration Resistance Range In Hertz

+5.0 to 1000.0

Voltage Standing Wave Ratio Frequency Limits Per Function

5.0 gigahertz blank and 8.0 gigahertz blank

Voltage Standing Wave Ratio Per Function

1.5 blank

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000209

Cross Reference

CAGE Codes

12436

Bae Systems Information and Electronic Systems Integration Inc. Div Bae Systems Information & Electronic Systems Integration Inc

U.s./canadian manufacturers

60656

Integrated Microwave Corporation Dba Integrated Microwave Corp

U.s./canadian manufacturers

50140

K&l Microwave Llc

U.s./canadian manufacturers

56216

Teledyne Wireless, Llc Dba Teledyne Microwave Solutions

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

593 - Motors and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-01-269-0881?

   The FSCG of the NSN 5915-01-269-0881 is 5915

2. Does the NSN 5915-01-269-0881 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-01-269-0881 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

4. Does NSN 5915-01-269-0881 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5915-01-269-0881 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-01-269-0881 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Fri, Dec 11, 1987