NSN 908225

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

unable to decode dial scale marking color, 2 threaded stud circuit attachment method and quantity, unable to decode accuracy in percent, white single indicator single range background color, dc circuit current for which designed.

NSN 6625-00-423-6841 Datasheet

(NSN) National Stock Number

6625-00-423-6841

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

00-423-6841

Requires Demilitarization

Yes

(INC) Item Name Code

61955

Date

Fri, Apr 9, 1971

Schedule B Code

9030908030

Accuracy In Percent

unable to decode

Background Color

white single indicator single range

Circuit Attachment Method And Quantity

2 threaded stud

Circuit Current For Which Designed

dc

Dial Scale Marking Color

unable to decode

Dielectric Withstanding Voltage In Volts

1500.0

Environmental Protection

cold resistant and heat resistant and shock resistant and submersible and vibration resistant and watertight

Features Provided

zero adjuster

Fsc Application Data

test set,elect. equip.

Furnished Items And Quantity

mtg hdw 3; term. hdw 2

Indicator Type

dial w/pointer

Installation Design

panel

Material

steel

Meter Body Diameter Behind Mounting Flange

2.210 inches maximum

Meter Depth Behind Mounting Flange

2.250 inches maximum

Mounting Arrangement Style

three hole/stud bolt circle

Mounting Bolt Circle Diameter

2.440 inches nominal

Mounting Facility Type And Quantity

3 threaded stud(s)

Movement Suspension Method

jewel pivot base

Movement Type

moving coil, permanent magnet

Mounting Stud Diameter

0.112 inches nominal

Mounting Stud Length

0.500 inches nominal

Nuclear Hardness Critical Feature

nonhardened

Overall Diameter

2.695 inches maximum

Overall Length

2.650 inches maximum

Panel For Which Designed

magnetic or nonmagnetic

Pointer Color

unable to decode

Scale Division Quantity

unable to decode

Scale Graduation Type

unable to decode

Scale Marking

rcvr pct band; 0; 10; 20; 30; 40; 50; 60; 70; 80; 90; 100

Sensitivity Rating

100.0 microamperes

Special Features

ruggedized

Style Designator

round flush mtg

Surface Treatment

enamel semigloss

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061955

Cross Reference

CAGE Codes

33005

Jewell Instruments Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

H - 110.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

136750

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-00-423-6841?

   The FSCG of the NSN 6625-00-423-6841 is 6625

2. Does the NSN 6625-00-423-6841 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-00-423-6841 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-00-423-6841 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-00-423-6841 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-00-423-6841 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Fri, Apr 9, 1971