NSN 90C877-082

A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes:flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. Excludes:disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

w/o mtg facilities, axial terminals body style, 0.395 inches minimum and 0.430 inches maximum body diameter, 1.094 inches minimum and 1.156 inches maximum body length, plastic case insulation material, 0.100 microfarads single section capacitance value per section.

NSN 5910-00-191-5892 Datasheet

(NSN) National Stock Number

5910-00-191-5892

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-191-5892

Requires Demilitarization

Yes

(INC) Item Name Code

31959

Date

Wed, Mar 11, 1970

Schedule B Code

8532290040

Body Diameter

0.395 inches minimum and 0.430 inches maximum

Body Length

1.094 inches minimum and 1.156 inches maximum

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

0.100 microfarads single section

Case Insulation Material

plastic

Dissipation Factor At Reference Temp In Percent

0.3000

Features Provided

hermetically sealed case

Insulation Resistance At Reference Temp

100000.0 megohm-microfarads

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

400.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.032 inches nominal

Terminal Length

1.500 inches minimum and 2.500 inches maximum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

04660-90c877 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0031959

Cross Reference

CAGE Codes

04660

Ail Systems Inc Sub of Eaton Corp

U.s./canadian manufacturers

99515

Electron Products Inc

U.s./canadian manufacturers

99217

Bell Industries Inc Electronic Distributor Div

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-191-5892?

   The FSCG of the NSN 5910-00-191-5892 is 5910

2. Does the NSN 5910-00-191-5892 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-191-5892 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-191-5892 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-191-5892 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-191-5892 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Wed, Mar 11, 1970