NSN 90SR309

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

relay actuator operating method, 4 coupling position quantity, 28.0 volts peak rf maximum voltage rating.

NSN 5985-00-843-5050 Datasheet

(NSN) National Stock Number

5985-00-843-5050

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

00-843-5050

Requires Demilitarization

Yes

(INC) Item Name Code

05118

Date

Mon, Jan 1, 1962

Schedule B Code

8529109000

Actuator Operating Method

relay

Coupling Position Quantity

4

Rf Maximum Voltage Rating

28.0 volts peak

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0005118

Cross Reference

CAGE Codes

03640

Lockheed Martin Corporation Div Rotary and Mission Systems

U.s./canadian manufacturers

0B6S1

International Business Machines Corp Parts Order Center Dept E - 54

U.s./canadian manufacturers

30874

International Business Machines Corporation Dba Ibm

Non-manufacturers

01456

Microwave Development Laboratories, Inc. Dba Microwave Development Laboratories Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-00-843-5050?

   The FSCG of the NSN 5985-00-843-5050 is 5985

2. Does the NSN 5985-00-843-5050 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-00-843-5050 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5985-00-843-5050 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-00-843-5050 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-00-843-5050 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962