NSN 9100-4099

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

weapon system essential special features, frequency rating, winding operating voltage, feat criticality code justification, lgm-30 minuteman missle. general purpose electronic test equipment (gpete). guard rail (systems 1-4). model 28 teletype. f-14 tomcat aircraft. ticonderoga class cg (47), nimitz class cvn, los angeles class ssn (688), forrestal class cv, spruance class dd (963). end item identification.

NSN 5950-01-147-0140 Datasheet

(NSN) National Stock Number

5950-01-147-0140

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-147-0140

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Wed, Feb 9, 1983

End Item Identification

lgm-30 minuteman missle. general purpose electronic test equipment (gpete). guard rail (systems 1-4). model 28 teletype. f-14 tomcat aircraft. ticonderoga class cg (47), nimitz class cvn, los angeles class ssn (688), forrestal class cv, spruance class dd (963).

Criticality Code Justification

feat

Frequency Rating

Special Features

weapon system essential

Winding Operating Voltage

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

1LQK8

Keysight Technologies, Inc.

U.s./canadian manufacturers

28480

Hewlett-Packard Company Dba Hp

U.s./canadian manufacturers

7ZXR5

Keysight Technologies Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-01-147-0140?

   The FSCG of the NSN 5950-01-147-0140 is 5950

2. Does NSN 5950-01-147-0140 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-01-147-0140 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5950-01-147-0140 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-01-147-0140 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Wed, Feb 9, 1983