NSN 9102E

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

0.250 inches nominal first counterbore depth, 0.812 inches nominal outside/top flange diameter, 0.312 inches nominal first counterbore diameter, rubber synthetic material, 0.156 inches nominal hole diameter.

NSN 5340-00-696-3180 Datasheet

(NSN) National Stock Number

5340-00-696-3180

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-696-3180

Requires Demilitarization

Yes

(INC) Item Name Code

67806

Date

Tue, Jan 1, 1963

First Counterbore Depth

0.250 inches nominal

First Counterbore Diameter

0.312 inches nominal

Hole Diameter

0.156 inches nominal

Material

rubber synthetic

Outside/Top Flange Diameter

0.812 inches nominal

Overall Height

0.500 inches nominal

Style Designator

flat top counterbored

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0067806

Cross Reference

CAGE Codes

08163

Exide Corp

U.s./canadian manufacturers

20038

Stryten Energy Llc Dba Stryten Manufacturing

Non-manufacturers

77969

Rubbercraft Corporation of California, Ltd. Dba Rubbercraft Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

84190

Water Commodity

772 - Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc

National Motor Freight Classification Item Number

156660

Questions & Answers

1. What is the FSCG of the NSN 5340-00-696-3180?

   The FSCG of the NSN 5340-00-696-3180 is 5340

2. Does NSN 5340-00-696-3180 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-696-3180 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-696-3180 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-696-3180 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963