NSN 912178

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

6220-01-180-8314, headlight.

NSN 6220-01-180-8314 Datasheet

(NSN) National Stock Number

6220-01-180-8314

(FSG) Federal Supply Group

62 - Lighting Fixtures and Lamps

(FSC) Federal Supply Classification

6220 - Electric Vehicular Lights and Fixtures

(NIIN) National Item Identification Number

01-180-8314

Requires Demilitarization

Yes

(INC) Item Name Code

22218

Date

Mon, Jun 4, 1984

Schedule B Code

8512202000

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0022218

Cross Reference

CAGE Codes

11083

Caterpillar Inc Div Caterpillar Defense

U.s./canadian manufacturers

55683

Wheeler Fleet Solutions, Co.

U.s./canadian manufacturers

73331

General Motors Corp Fisher Guide Div

U.s./canadian manufacturers

12662

Peterson Mfg Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

08820

Water Commodity

585 - Vehicles and auto supplies

National Motor Freight Classification Item Number

017870

Schedule B & Trade

Schedule B

8512-20-2000

Description

lighting equipment for motor vehicles

End Use

30230 - Other parts and accessories of vehicles

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77834

(NAICS) North American Industrial Classification System

336320

Questions & Answers

1. What is the FSCG of the NSN 6220-01-180-8314?

   The FSCG of the NSN 6220-01-180-8314 is 6220

2. Does the NSN 6220-01-180-8314 have a Schedule B code assigned?

   Yes, the Schedule B code is 8512202000

3. Does NSN 6220-01-180-8314 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6220-01-180-8314 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6220-01-180-8314 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6220-01-180-8314 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Mon, Jun 4, 1984