NSN 9135553

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

tube type body style, time delay circuit over-current interruption type, 12.0 200 pct of current rating circuit over-current interruption delay time in seconds, 0.800 continuous current rating in amps, nonrenewable fusible element features provided.

NSN 5920-00-227-6586 Datasheet

(NSN) National Stock Number

5920-00-227-6586

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

00-227-6586

Requires Demilitarization

Yes

(INC) Item Name Code

00248

Date

Thu, May 17, 1973

Schedule B Code

8536100040

Body Style

tube type

Circuit Over-Current Interruption Delay Time In Seconds

12.0 200 pct of current rating

Circuit Over-Current Interruption Type

time delay

Continuous Current Rating In Amps

0.800

Features Provided

nonrenewable fusible element

Interruption Indicator Method

opaque body

Material

copper or copper alloy terminal

Material

ceramic or plastic case

Maximum Voltage Rating In Volts

250.0 ac and 250.0 dc

Overall Diameter

0.246 inches minimum and 0.254 inches maximum

Overall Length

1.219 inches minimum and 1.281 inches maximum

Specification/Standard Data

81349-mil-f-15160/3 government specification

Surface Treatment

unable to decode

Test Data Document

"81349-mil-f-15160 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000248

Cross Reference

CAGE Codes

D9853

Rockwell Collins Deutschland Gmbh Div Rockwell Collins International & Service Solutions

Non-us manufacturer (nato), other foreign organization or codification bureaus

75915

Littelfuse, Inc.

U.s./canadian manufacturers

D3841

Wickmann Werke Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

K1182

Thales Uk Limited Dba Thales Uk Ltd Training and Simulation

Non-us manufacturer (nato), other foreign organization or codification bureaus

24655

Genrad Inc

U.s./canadian manufacturers

0NKU0

Lct Electronics

U.s./canadian manufacturers

66250

Aseptico, Inc. Dba Aseptico Inc

U.s./canadian manufacturers

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34740

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062060

Schedule B & Trade

Schedule B

8536-10-0040

Description

fuses, except glass cartridge, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77251

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5920-00-227-6586?

   The FSCG of the NSN 5920-00-227-6586 is 5920

2. Does the NSN 5920-00-227-6586 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536100040

3. Does NSN 5920-00-227-6586 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5920-00-227-6586 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5920-00-227-6586 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5920-00-227-6586 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Thu, May 17, 1973