NSN 9145591

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

unable to decode distance between mounting facility centers, 1.705 inches nominal body width, unable to decode dc resistance rating in ohms, 2.640 inches maximum body height, 2.560 inches nominal body length.

NSN 5950-00-732-7946 Datasheet

(NSN) National Stock Number

5950-00-732-7946

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-732-7946

Requires Demilitarization

Yes

(INC) Item Name Code

00208

Date

Tue, Jan 1, 1963

Schedule B Code

8504500000

Body Height

2.640 inches maximum

Body Length

2.560 inches nominal

Body Width

1.705 inches nominal

Dc Resistance Rating In Ohms

unable to decode

Distance Between Mounting Facility Centers

unable to decode

Inclosure Type

hermetically sealed

Maximum Operating Temp

71.0 celsius

Mounting Facility Quantity

unable to decode

Mounting Method

unable to decode

Nominal Thread Size

unable to decode

Primary To Secondary Turn Ratio

unable to decode

Pulse Repetition Rate

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

6 solder stud

Thread Series Designator

unable to decode

Winding Function And Quantity

Winding Shielding Method

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000208

Cross Reference

CAGE Codes

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

92663

At and T Co Advanced Technology Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Schedule B & Trade

Schedule B

8504-50-0000

Description

inductors, nesoi

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77125

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5950-00-732-7946?

   The FSCG of the NSN 5950-00-732-7946 is 5950

2. Does the NSN 5950-00-732-7946 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504500000

3. Does NSN 5950-00-732-7946 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-732-7946 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-732-7946 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-732-7946 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963