NSN 9200 A2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

replaceable filter replaceability, cartridge filter type, not included exhaust valve, nonadjustable adjustability, not included head harness.

NSN 4240-01-688-1550 Datasheet

(NSN) National Stock Number

4240-01-688-1550

(FSG) Federal Supply Group

42 - Firefighting, Rescue, and Safety Equipment; and Environmental Protection Equipment and Materials

(FSC) Federal Supply Classification

4240 - Safety and Rescue Equipment

(NIIN) National Item Identification Number

01-688-1550

Requires Demilitarization

Yes

(INC) Item Name Code

29347

Date

Wed, May 6, 2020

Adjustability

nonadjustable

Exhaust Valve

not included

Filter Replaceability

replaceable

Filter Type

cartridge

Head Harness

not included

Mask Filter Quantity

1

Mask Type

mouth

Part Name Assigned By Controlling Agency

gas filter

Strap Type

single

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0029347

Cross Reference

CAGE Codes

0FA00

Moldex-Metric, Inc. Dba Moldex Metric Inc

U.s./canadian manufacturers

F6481

Thales Sa

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 4240-01-688-1550?

   The FSCG of the NSN 4240-01-688-1550 is 4240

2. Does NSN 4240-01-688-1550 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 4240-01-688-1550 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 4240-01-688-1550 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 4240-01-688-1550 was assigned to the Federal Catalog?

   It was assigned 6 years ago, on Wed, May 6, 2020