NSN 9216B41

An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). Excludes:nut (1), plain, cap. See also turnbuckle body.

2.281 inches nominal inside diameter, 0.063 inches nominal overall thickness, 3.031 inches nominal outside diameter.

NSN 5365-00-779-1186 Datasheet

(NSN) National Stock Number

5365-00-779-1186

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5365 - Bushings, Rings, Shims and Spacers

(NIIN) National Item Identification Number

00-779-1186

Requires Demilitarization

Yes

(INC) Item Name Code

24307

Date

Fri, Jan 1, 1960

Inside Diameter

2.281 inches nominal

Outside Diameter

3.031 inches nominal

Overall Thickness

0.063 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0024307

Cross Reference

CAGE Codes

80049

Department of the Air Force

U.s./canadian manufacturers

98747

Ogden Air Logistics Center

U.s./canadian manufacturers

13002

Goodrich Corporation Div Advanced Structures Landing Systems

Non-manufacturers

6K4C8

Goodrich Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

T - 55.0

National Motor Freight Class Rating

T - 55.0

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

50675

Water Commodity

572 - Iron or steel bars, (less than 35 feet)(see 822)

National Motor Freight Classification Item Number

106940

Questions & Answers

1. What is the FSCG of the NSN 5365-00-779-1186?

   The FSCG of the NSN 5365-00-779-1186 is 5365

2. Does NSN 5365-00-779-1186 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5365-00-779-1186 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5365-00-779-1186 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5365-00-779-1186 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960