NSN 926A14

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

clamp accommodated item securing device type, 65.0 angle between mounting facility and tension loop centerlines in deg, 0.797 inches nominal distance from retainer center to centerline of mounting facility, 100.0 angle between mounting facility and loop hinge centerlines in deg, 1.453 inches maximum distance from retainer center to end of extended clip.

NSN 5960-00-151-7571 Datasheet

(NSN) National Stock Number

5960-00-151-7571

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5960 - Electron Tubes and Associated Hardware

(NIIN) National Item Identification Number

00-151-7571

Requires Demilitarization

Yes

(INC) Item Name Code

16182

Date

Tue, Jan 1, 1963

Schedule B Code

8540990000

Accommodated Item Securing Device Type

clamp

Angle Between Mounting Facility And Loop Hinge Centerlines In Deg

100.0

Angle Between Mounting Facility And Tension Loop Centerlines In Deg

65.0

Distance From Retainer Center To Centerline Of Mounting Facility

0.797 inches nominal

Distance From Retainer Center To End Of Extended Clip

1.453 inches maximum

Electron Tube Base Accommodated Diameter

+1.136 to 1.175 inches

Features Provided

holding spur

Inside Diameter

1.156 inches nominal

Material

steel corrosion resisting

Mounting Facility Type And Quantity

unable to decode

Mounting Slot Length

unable to decode

Mounting Slot Width

unable to decode

Overall Height

0.750 inches nominal

Style Designator

single foot, clip locked, tension clamp

Surface Treatment

passivate

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016182

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

07387

Birtcher Corp

U.s./canadian manufacturers

80249

Bae Systems Information and Electronic Systems Integration Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8540-99-0000

Description

thermionic, cold cathode or photocathode tube parts, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77629

(NAICS) North American Industrial Classification System

334419

Questions & Answers

1. What is the FSCG of the NSN 5960-00-151-7571?

   The FSCG of the NSN 5960-00-151-7571 is 5960

2. Does the NSN 5960-00-151-7571 have a Schedule B code assigned?

   Yes, the Schedule B code is 8540990000

3. Does NSN 5960-00-151-7571 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5960-00-151-7571 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5960-00-151-7571 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5960-00-151-7571 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963