NSN 93P112

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

1.750 inches minimum and 1.874 inches maximum body length, w/mtg tabs/flanges, terminal(s) on one surface body style, 0.875 inches minimum and 1.062 inches maximum body height, 0.938 inches minimum and 1.062 inches maximum body width, 0.500 microfarads single section capacitance value per section.

NSN 5910-00-126-9170 Datasheet

(NSN) National Stock Number

5910-00-126-9170

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-126-9170

Requires Demilitarization

Yes

(INC) Item Name Code

00003

Date

Tue, Jan 1, 1963

Schedule B Code

8532250080

Body Height

0.875 inches minimum and 1.062 inches maximum

Body Length

1.750 inches minimum and 1.874 inches maximum

Body Style

w/mtg tabs/flanges, terminal(s) on one surface

Body Width

0.938 inches minimum and 1.062 inches maximum

Capacitance Value Per Section

0.500 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

1.062 inches nominal

Dissipation Factor At Reference Temp In Percent

1.0000

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.094 inches minimum and 2.156 inches maximum

Features Provided

hermetically sealed case

Internal Electrical Connection Type

inserted tab

Insulation Resistance At Maximum Operating Temp

20.0 megohm-microfarads

Insulation Resistance At Reference Temp

2000.0 megohm-microfarads

Mounting Facility Type And Quantity

2 unthreaded mounting holes

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

600.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-25/4d government specification

Terminal Length

0.750 inches maximum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 tab, solder lug

Test Data Document

"81349-mil-c-25 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Unthreaded Mounting Hole Diameter

0.172 inches minimum and 0.204 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000003

Cross Reference

CAGE Codes

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

03538

Lockheed Martin Corporation Div Rms

U.s./canadian manufacturers

19204

Army, United States Department of the Dba Rock Island Arsenal Jmtc

Non-manufacturers

24617

General Motors Corp

U.s./canadian manufacturers

99974

Delco Electronics Corp Delco Systems Opns

U.s./canadian manufacturers

06481

Northrop Grumman Systems Corporation Div the Navigation, Targeting and Survivability Division

U.s./canadian manufacturers

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

07860

Bogue Electric Manufacturing Co

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

14655

Cornell-Dubilier Electronics

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-126-9170?

   The FSCG of the NSN 5910-00-126-9170 is 5910

2. Does the NSN 5910-00-126-9170 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-126-9170 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-126-9170 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-00-126-9170 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-126-9170 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963