NSN 94564A315

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

right-hand thread direction, plastic polyamide nylon material, 4940-01-658-0431 end item identification, 2a thread class, 0.3125 inches nominal thread length.

NSN 5340-01-671-2202 Datasheet

(NSN) National Stock Number

5340-01-671-2202

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-671-2202

Requires Demilitarization

Yes

(INC) Item Name Code

13435

Date

Tue, Mar 20, 2018

Schedule B Code

3926904500

End Item Identification

4940-01-658-0431

Material

plastic polyamide nylon

Thread Class

2a

Thread Direction

right-hand

Thread Length

0.3125 inches nominal

Thread Quantity Per Inch

18

Thread Series Designator

unified national coarse (unc)

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0013435

Cross Reference

CAGE Codes

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

0KVE6

Mcmaster-Carr Supply Co

Non-manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

3926-90-4500

Description

gaskets,washers & other seals

End Use

12770 - Other industrial supplies

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89399

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5340-01-671-2202?

   The FSCG of the NSN 5340-01-671-2202 is 5340

2. Does the NSN 5340-01-671-2202 have a Schedule B code assigned?

   Yes, the Schedule B code is 3926904500

3. Does NSN 5340-01-671-2202 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-671-2202 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-671-2202 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-671-2202 was assigned to the Federal Catalog?

   It was assigned 8 years ago, on Tue, Mar 20, 2018