NSN 95-102352

A metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.

1.000 microfarads single section capacitance value per section, solid anode type, 0.286 inches nominal body length, 0.120 inches minimum and 0.151 inches maximum body diameter, w/o mtg facilities, axial terminals body style.

NSN 5910-01-252-6036 Datasheet

(NSN) National Stock Number

5910-01-252-6036

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-252-6036

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Sun, Apr 5, 1987

Schedule B Code

8532290040

Anode Type

solid

Body Diameter

0.120 inches minimum and 0.151 inches maximum

Body Length

0.286 inches nominal

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

1.000 microfarads single section

Capacitive Electrode Material

tantalum

Case Insulation Material

plastic

Criticality Code Justification

feat

Dc Leakage At Maximum Operating Temp

8.0 microamperes

Dc Leakage At Reference Temp

0.400 microamperes

Dissipation Factor At Reference Temp In Percent

2.000

Electrical Polarization

polarized

Features Provided

hermetically sealed case

Mil-Std-1276 Wire Lead Type Designator

n-4

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Reliability Failure Rate Level In Percent

0.001

Reliability Indicator

established

Schematic Diagram Designator

electrode(s) grounded to case, w/gnd terminal

Special Features

weibull graded failure rate

Specification/Standard Data

81349-mil-c-39003/1 government specification

Terminal Diameter

0.020 inches nominal

Terminal Length

1.500 inches nominal

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-39003 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

28009

Sypris Electronics, Llc Div Sypris Electronics, Llc - Colorado Field Services

U.s./canadian manufacturers

53711

Naval Sea Systems Command

U.s./canadian manufacturers

06424

Alliant Techsystems Operations Llc Div Defense Electronic Systems

U.s./canadian manufacturers

51357

Northern Telecom Systems Corp

U.s./canadian manufacturers

99971

Lockheed Martin Corp Naval Electronics & Surveillance Systems

U.s./canadian manufacturers

64547

Honeywell International, Inc Div Aerospace-Tucson

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

9E609

Mallory Capacitor Co Sub of Emhart Industries Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-252-6036?

   The FSCG of the NSN 5910-01-252-6036 is 5910

2. Does the NSN 5910-01-252-6036 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-252-6036 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-252-6036 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-252-6036 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-252-6036 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Sun, Apr 5, 1987