NSN 951613

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

steel comp 1035 material, 0.438 inches nominal pivot pin hole diameter, 0.281 inches nominal locking pin hole diameter, manual pintle type for which designed, sae 1035 assn std single material response material document and classification.

NSN 2540-00-735-0156 Datasheet

(NSN) National Stock Number

2540-00-735-0156

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2540 - Vehicular Furniture and Accessories

(NIIN) National Item Identification Number

00-735-0156

Requires Demilitarization

Yes

(INC) Item Name Code

11401

Date

Sun, Jan 1, 1961

Schedule B Code

9403901000

Locking Pin Hole Diameter

0.281 inches nominal

Material Document And Classification

sae 1035 assn std single material response

Material

steel comp 1035

Pintle Type For Which Designed

manual

Pivot Pin Hole Diameter

0.438 inches nominal

Overall Height

1.250 inches nominal

Overall Length

2.250 inches nominal

Overall Width

1.500 inches nominal

Style Designator

spring loaded t-lock w/cotter pin hole

Threaded Pivot Pin Locking Hole

not included

Width At Pivot Pin Hole

0.610 inches minimum and 0.620 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

AKZ - Us army tank-automotive and armaments command warren, mi 48397-5000

Pseudo Item Name Code

0011401

Cross Reference

CAGE Codes

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

58275

Sasco Inc Canadian Div

U.s./canadian manufacturers

Freight Information

Air Commodity

BY -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

5 - Low sensitivity, category iv, aa&e, unclassified

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094100

Questions & Answers

1. What is the FSCG of the NSN 2540-00-735-0156?

   The FSCG of the NSN 2540-00-735-0156 is 2540

2. Does the NSN 2540-00-735-0156 have a Schedule B code assigned?

   Yes, the Schedule B code is 9403901000

3. Does NSN 2540-00-735-0156 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2540-00-735-0156 contain precious materials?

   Precious metal content is unknown

5. Does NSN 2540-00-735-0156 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2540-00-735-0156 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961