NSN 97-0939

A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. See also locknut, tube fitting. For items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

sponge ster samp c/o speci-sponge & whirl-pak bag 4-1/2x9 in100s part name assigned by controlling agency, whirl-pak design; c/o speci-sponge, 4-1/2 x 9 in.; 2.5 ml thick; 18 oz. capacity; absorbent; free of bactericides; non-inhibitory; in whirl-pak bag; for environmental surface sampling; after adding diluent and wiping surface to be tested, sponge is transported to laboratory for analysis in whirl-pak bag; unit issue pg of 100 general characteristics item description.

NSN 6640-01-451-8089 Datasheet

(NSN) National Stock Number

6640-01-451-8089

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6640 - Laboratory Equipment and Supplies

(NIIN) National Item Identification Number

01-451-8089

Requires Demilitarization

Yes

(INC) Item Name Code

53365

Date

Tue, Jan 6, 1998

General Characteristics Item Description

whirl-pak design; c/o speci-sponge, 4-1/2 x 9 in.; 2.5 ml thick; 18 oz. capacity; absorbent; free of bactericides; non-inhibitory; in whirl-pak bag; for environmental surface sampling; after adding diluent and wiping surface to be tested, sponge is transported to laboratory for analysis in whirl-pak bag; unit issue pg of 100

Part Name Assigned By Controlling Agency

sponge ster samp c/o speci-sponge & whirl-pak bag 4-1/2x9 in100s

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0053365

Cross Reference

CAGE Codes

0HST1

Weber Scientific, Inc.

Non-manufacturers

89875

Defense Logistics Agency Directorate of Medical Materiel Defense Supply Center Philadelphia

U.s./canadian manufacturers

Freight Information

Air Commodity

MZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

68045

Water Commodity

534 - Medical supplies (room temperature) (not requiring temperature control)

National Motor Freight Classification Item Number

056828

Questions & Answers

1. What is the FSCG of the NSN 6640-01-451-8089?

   The FSCG of the NSN 6640-01-451-8089 is 6640

2. Does NSN 6640-01-451-8089 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6640-01-451-8089 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6640-01-451-8089 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6640-01-451-8089 was assigned to the Federal Catalog?

   It was assigned 28 years ago, on Tue, Jan 6, 1998