NSN 970626DA

An item fabricated from nonmetallic special shaped section. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes:bushing, nonmetallic; packing, performed; pad, cushioning;and seal, plain. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic special shaped section.

friction design type, plastic polyvinyl chloride (pvc) material, 16.750 millimeters nominal tube outside diameter for which designed, 15.750 millimeters nominal opening inside diameter for which designed.

NSN 5340-01-466-1939 Datasheet

(NSN) National Stock Number

5340-01-466-1939

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-466-1939

Requires Demilitarization

Yes

(INC) Item Name Code

13432

Date

Fri, Jul 9, 1999

Schedule B Code

3926904500

Design Type

friction

Material

plastic polyvinyl chloride (pvc)

Opening Inside Diameter For Which Designed

15.750 millimeters nominal

Tube Outside Diameter For Which Designed

16.750 millimeters nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0013432

Cross Reference

CAGE Codes

53711

Naval Sea Systems Command

U.s./canadian manufacturers

25205

Molded Devices, Inc. Dba Mdi Div Molded Devices

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

3926-90-4500

Description

gaskets,washers & other seals

End Use

12770 - Other industrial supplies

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89399

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5340-01-466-1939?

   The FSCG of the NSN 5340-01-466-1939 is 5340

2. Does the NSN 5340-01-466-1939 have a Schedule B code assigned?

   Yes, the Schedule B code is 3926904500

3. Does NSN 5340-01-466-1939 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-466-1939 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-01-466-1939 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-466-1939 was assigned to the Federal Catalog?

   It was assigned 27 years ago, on Fri, Jul 9, 1999