NSN 9727-C41

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

280.0 deg celsius minimum flash point, 500.0 milliliters quantity within each unit package, 82 centistokes at 1oo deg f maximum viscosity at rated temp.

NSN 9150-01-588-9416 Datasheet

(NSN) National Stock Number

9150-01-588-9416

(FSG) Federal Supply Group

91 - Fuels, Lubricants, Oils, and Waxes

(FSC) Federal Supply Classification

9150 - Hydraulic, Lubricating and Oils and Greases: Cutting

(NIIN) National Item Identification Number

01-588-9416

Requires Demilitarization

Yes

(INC) Item Name Code

30150

Date

Tue, Oct 12, 2010

Maximum Viscosity At Rated Temp

82 centistokes at 1oo deg f

Minimum Flash Point

280.0 deg celsius

Quantity Within Each Unit Package

500.0 milliliters

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

D - Indicates there is no information in the hmirs; however, the nsn is in a fsc in table i of federal standard 313 and a msds should be available to the user.

Pseudo Item Name Code

0030150

Cross Reference

CAGE Codes

94481

Cannon Instrument Company Dba Cannon Instrument Co, Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

FZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

R - 65.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

77230

Water Commodity

603 - Petroleum, lubricating or similar oils (other than bulk)

National Motor Freight Classification Item Number

155150

Questions & Answers

1. What is the FSCG of the NSN 9150-01-588-9416?

   The FSCG of the NSN 9150-01-588-9416 is 9150

2. Does NSN 9150-01-588-9416 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 9150-01-588-9416 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 9150-01-588-9416 contain hazardous materials?

   Indicates there is no information in the hmirs; however, the nsn is in a fsc in table i of federal standard 313 and a msds should be available to the user.

5. When the NSN 9150-01-588-9416 was assigned to the Federal Catalog?

   It was assigned 15 years ago, on Tue, Oct 12, 2010