NSN 97A107-5

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

stand type w/ or w/o stand body style, 1 cable conductor quantity, cable accessory components, 1.500 inches nominal diameter, 1 cable shielded conductor quantity.

NSN 5965-00-504-3779 Datasheet

(NSN) National Stock Number

5965-00-504-3779

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5965 - Microphones and Speakers Handsets Headsets

(NIIN) National Item Identification Number

00-504-3779

Requires Demilitarization

Yes

(INC) Item Name Code

00362

Date

Sat, Jul 13, 1974

Schedule B Code

8518903000

Accessory Components

cable

Body Style

stand type w/ or w/o stand

Cable Conductor Quantity

1

Cable Shielded Conductor Quantity

1

Diameter

1.500 inches nominal

Electrical Connection Type

integral cable

Extended Cable Length

7.0 feet nominal

Frequency Response Range In Hertz

+40.0 to 15000.0

Fsc Application Data

audio equipment

Height

6.000 inches nominal

Impedance Rating

100.0 kilohms minimum

Length

5.000 inches nominal

Mounting Method

adapter

Output Ac Voltage Rating

1.11 millivolts nominal

Output Sensitivity Rating In Decibels

-59.0

Output Sensitivity Rating Reference

1 volt per microbar

Polarity Connection

not required

Sound Pickup Directional Type

omnidirectional

Switch Type

slide

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000362

Cross Reference

CAGE Codes

1LQK8

Keysight Technologies, Inc.

U.s./canadian manufacturers

28480

Hewlett-Packard Company Dba Hp

U.s./canadian manufacturers

7ZXR5

Keysight Technologies Inc

U.s./canadian manufacturers

54715

Shure Bros Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

87660

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

178580

Schedule B & Trade

Schedule B

8518-90-3000

Description

microphone parts, loudspeaker parts, amplifier parts & headphone parts

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76492

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5965-00-504-3779?

   The FSCG of the NSN 5965-00-504-3779 is 5965

2. Does the NSN 5965-00-504-3779 have a Schedule B code assigned?

   Yes, the Schedule B code is 8518903000

3. Does NSN 5965-00-504-3779 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5965-00-504-3779 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5965-00-504-3779 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5965-00-504-3779 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Sat, Jul 13, 1974