NSN 97F7515FC

An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or printed wiring board and is not designed to be mounted on a bulkhead, chasses, panel, printed wiring board, or the like. Excludes:jack, telephone; jack, tip; plug, telephone; plug tip; insert, electrical connector; connector body (as modified); and socket, plug-in, electronic components. See also lead assembly, electrical; wiring harness (as modified); and cable assembly (as modified). For items without inserts, see shell, electrical connector.

50.000 microfarads single section capacitance value per section, 1.560 inches nominal body width, 3.500 inches nominal body height, w/o mtg facilities, terminal(s) on one surface body style, 2.690 inches nominal body length.

NSN 5910-00-356-6484 Datasheet

(NSN) National Stock Number

5910-00-356-6484

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-356-6484

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Wed, Mar 25, 1970

Schedule B Code

8532250080

Body Height

3.500 inches nominal

Body Length

2.690 inches nominal

Body Style

w/o mtg facilities, terminal(s) on one surface

Body Width

1.560 inches nominal

Capacitance Value Per Section

50.000 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

0.810 inches nominal

Center To Center Distance Between Terminals Parallel To Width

0.810 inches nominal

Dissipation Factor At Reference Temp In Percent

0.600

Dielectric Material

plastic polyester

Nonderated Operating Temp

-40.0 celsius minimum and 70.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

250.0 ac-rms single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

0.0 single section

Terminal Diameter

0.750 inches nominal

Terminal Length

1.120 inches nominal

Terminal Height From Body

0.720 inches nominal

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 threaded stud

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-3.0 to 3.0 single section

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

01002

General Electric Co Capacitors Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-356-6484?

   The FSCG of the NSN 5910-00-356-6484 is 5910

2. Does the NSN 5910-00-356-6484 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-356-6484 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-356-6484 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-356-6484 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-356-6484 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Wed, Mar 25, 1970