NSN 988704

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

field effect internal configuration, to-92 joint electronic device engineering council/jedec/case outline designation, integrated underwater surveillance systems; forrestal class cv; nimitz class cvn; trident exterior communications; submarine communications and antenna systems end item identification, 10.00 milliamperes maximum gate current current rating per characteristic, plastic enclosure material.

NSN 5961-01-154-6098 Datasheet

(NSN) National Stock Number

5961-01-154-6098

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5961 - Semiconductor Devices and Associated Hardware

(NIIN) National Item Identification Number

01-154-6098

Requires Demilitarization

Yes

(INC) Item Name Code

20588

Date

Sat, May 28, 1983

Schedule B Code

8541500080

End Item Identification

integrated underwater surveillance systems; forrestal class cv; nimitz class cvn; trident exterior communications; submarine communications and antenna systems

Current Rating Per Characteristic

10.00 milliamperes maximum gate current

Internal Configuration

field effect

Joint Electronic Device Engineering Council/Jedec/Case Outline Designation

to-92

Material

plastic enclosure

Maximum Operating Temp Per Measurement Point

150.0 celsius junction

Mounting Method

terminal

Overall Height

0.165 inches maximum

Overall Length

0.210 inches maximum

Overall Width

0.205 inches maximum

Power Rating Per Characteristic

200.0 milliwatts maximum total device dissipation

Semiconductor Material

silicon

Terminal Length

0.500 inches minimum

Terminal Type And Quantity

3 uninsulated wire lead

Voltage Rating In Volts Per Characteristic

40.0 maximum drain to source voltage and 40.0 maximum drain to gate voltage and 40.0 maximum gate to source voltage

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0020588

Cross Reference

CAGE Codes

31160

Datum Inc Bancomm-Timing Div

U.s./canadian manufacturers

63123

Farris, M & Associates

Non-manufacturers

73293

Stellant Systems Inc

U.s./canadian manufacturers

21845

Solitron Devices, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34525

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063025

Questions & Answers

1. What is the FSCG of the NSN 5961-01-154-6098?

   The FSCG of the NSN 5961-01-154-6098 is 5961

2. Does the NSN 5961-01-154-6098 have a Schedule B code assigned?

   Yes, the Schedule B code is 8541500080

3. Does NSN 5961-01-154-6098 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5961-01-154-6098 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5961-01-154-6098 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5961-01-154-6098 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Sat, May 28, 1983