NSN 989C976H02

An item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. Excludes:internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. For cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).

multipole-multiple actuator type body style, at each pole actuator position designation, trip-reset actuator function, 2.280 inches maximum body width, 2.500 inches nominal body length.

NSN 5925-00-593-4648 Datasheet

(NSN) National Stock Number

5925-00-593-4648

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

00-593-4648

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Wed, Jan 8, 1975

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at each pole

Body Length

2.500 inches nominal

Body Style

multipole-multiple actuator type

Body Width

2.280 inches maximum

Boss Height

0.145 inches nominal

Center To Center Distance Between Terminals Parallel To Length

1.938 inches nominal

Center To Center Distance Between Terminals Parallel To Width

0.750 inches nominal

Circuit Protection Type

overcurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.750 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.062 inches nominal

External Actuator Linkage Arrangement

one, two, and three linked

Frequency In Hertz

400.0 all locations

Inclosure Protection Type For Which Designed

fungus resistant

Internal Trip Release Configuration

series trip all locations

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

3 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

15.0 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

1000.0 ac all locations

Mounting Facility Type And Quantity

6 threaded hole(s)

Mounting Surface To Terminal End Distance

2.485 inches nominal

Nominal Thread Size

0.138 inches

Operating Voltage Type And Rating Per Pole In Volts

115.0 ac all locations

Pole Quantity

3

Reset Method

manual

Terminal Type And Quantity

6 threaded stud

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Trip Release Characteristic

time delay all locations

Trip Release Method

magnetic-hydraulic all locations

Trip Delay Time In Seconds Per Rated Continuous Current

1.000 nominal at 125 pct all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 all locations

Ultimate Trip Time Per Pole In Seconds

10.000 nominal all locations

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

FPZ - San antonio air logistics center kelly afb, texas 78241-5000

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

18323

Northrop Grumman Systems Corporation Dba Electronic Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-00-593-4648?

   The FSCG of the NSN 5925-00-593-4648 is 5925

2. Does the NSN 5925-00-593-4648 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-00-593-4648 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-00-593-4648 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-00-593-4648 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-00-593-4648 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Wed, Jan 8, 1975