NSN 993306-63

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

0.312 inches minimum and 0.328 inches maximum outside diameter, 0.060 inches minimum and 0.070 inches maximum shank height, 0.177 inches minimum and 0.187 inches maximum shank outside diameter, 0.136 inches minimum and 0.146 inches maximum inside diameter, 0.115 inches nominal overall height.

NSN 5970-01-007-6077 Datasheet

(NSN) National Stock Number

5970-01-007-6077

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5970 - Electrical Insulators and Insulating Materials

(NIIN) National Item Identification Number

01-007-6077

Requires Demilitarization

Yes

(INC) Item Name Code

18301

Date

Sat, Aug 9, 1975

Schedule B Code

8546900000

Inside Diameter

0.136 inches minimum and 0.146 inches maximum

Outside Diameter

0.312 inches minimum and 0.328 inches maximum

Overall Height

0.115 inches nominal

Shank Height

0.060 inches minimum and 0.070 inches maximum

Shank Outside Diameter

0.177 inches minimum and 0.187 inches maximum

Style Designator

shoulder

Material And Location

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0018301

Cross Reference

CAGE Codes

21355

Lta/d-Cemco Inc Dba D-Cemco

U.s./canadian manufacturers

82577

Raytheon Company Dba Raytheon

Non-manufacturers

86928

Seastrom Manufacturing Co Inc

U.s./canadian manufacturers

61081

Schroff Inc

U.s./canadian manufacturers

62372

Precise of California Div of Adjustable Bushing Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

53360

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

103300

Schedule B & Trade

Schedule B

8546-90-0000

Description

electrical insulators, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77324

(NAICS) North American Industrial Classification System

335932

Questions & Answers

1. What is the FSCG of the NSN 5970-01-007-6077?

   The FSCG of the NSN 5970-01-007-6077 is 5970

2. Does the NSN 5970-01-007-6077 have a Schedule B code assigned?

   Yes, the Schedule B code is 8546900000

3. Does NSN 5970-01-007-6077 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5970-01-007-6077 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5970-01-007-6077 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5970-01-007-6077 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Sat, Aug 9, 1975