AAQL |
The style designation indicating the configuration that most nearly corresponds to the appearance of the body. |
ADAQ |
A measurement of the longest dimension of the body, in distinction from width. |
ADAT |
A measurement taken at right angles to the length of the body, in distinction from thickness. |
ADAU |
A measurement from the bottom to the top of the body, in distinction from depth. |
ADTV |
The element, compound, or mixture of which the case is fabricated, excluding any surface treatment. |
AEBP |
The center to center distance between terminals parallel to the length of the item. |
AEBQ |
The center to center distance between terminals parallel to the width of the item. |
AEBV |
The length of a straight line which passes through the center of an unthreaded mounting hole, and terminates at the circumference. |
AEBY |
The distance between centerlines of mounting facilities parallel to the length of the item. |
AEHA |
The distance between centerlines of mounting facilities parallel to the width of the item. |
AKPX |
The number of poles included in the item. |
AXHR |
Indicates the type and number of facilities by which the item is mounted. |
BBRG |
Indicates the type of storage space required for an item in order to provide the degree of protection necessary to maintain serviceability standards. |
CBBL |
Those features, not otherwise specified, which may be required for proper functioning of the item. |
CPLM |
The maximum current load that each pole is rated to carry continuously. |
CPRF |
Indicates the type and value of operating voltage for which each pole is designed to operate, expressed in volts. |
CPRG |
Indicates the type and value of the maximum short circuit current that the item will successfully interrupt, per pole, at the specified rated voltage, expressed in amperes. |
CPRH |
Indicates the type of electrical condition that will cause the device to trip. |
CPRJ |
The means by which the trip mechanism is released. |
CPRL |
Denotes the type of trip release action. |
CPRN |
The continuous current rating per pole at which the device must trip in a specified time, expressed in percent. |
CPRQ |
The means provided to reposition the mechanism so that the device is ready to function. |
CPRR |
Indicates the type of mechanism provided for tripping main contacts. |
CPRT |
Indicates the type and number of actuators provided for manual control. |
CPRW |
Denotes the action imparted by actuator operation. |
CPRX |
An indication of the designated position of the actuator. |
CPSF |
The minimum and maximum values of current to which an adjustable trip setting device may be set per pole, expressed in amperes. |
CPSM |
The basic internal electrical configuration of the trip mechanism. |
CQWN |
The length of time, expressed in seconds, that an overload may exist before the device will trip at a specified continuous current. |
CQXF |
Indicates the type of protection for which the inclosure is designed. |
FREQ |
The cycles per second /hertz/ of the alternating current. |
TTQY |
Indicates the type and number of terminals for providing electrical connection. |