Request Pricing & Availability

NSN: 3110-00-001-4707
Part Number(s):
Quantity:
Company:
Name & Email:
Phone:
Order Terms | Privacy Policy    

Part Numbers

Item Number Item Description
AS21151 Bearing, Ball, Rod End
MS51151-3 Bearing, Ball, Rod End
MS21151-3 Bearing, Ball, Rod End
REP3M6AFS464 Bearing, Ball, Rod End
REP3M6-3F Bearing, Ball, Rod End
AN946RE3M6A Bearing, Ball, Rod End

Master Requirement Codes

Code Translation
AGZA Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.
AGYW Indicates the type of seal provided with the bearing.
ABXV The length of a straight line which passes through the center of a circular bore, and terminates at the circumference.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
CQJX A designation that is used for the purpose of general identification of the thread.
LMDC The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the lubrication material.
ADZG The element, compound, or mixture with which the item is lubricated.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
AGYJ The number of seals included on the item.
AHAW Indicates the location of the self-alignment feature.
AAZE The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
AAZF The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
ABHP The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
ADGA The overall length of a straight line which passes through the center of an item, and terminates at the outside circumference.
FEAT Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
STYL The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
STDC The specification, standard, or manufacturers reference, and the classification designation, such as type, class, grade, and the like, that identifies the surface treatment material.
STDC The specification, standard, or manufacturers reference, and the classification designation, such as type, class, grade, and the like, that identifies the surface treatment material.
SFTT The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
SFTT The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
AAJD A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
AAJF The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
CMLP The number of threads on the item per linear inch measured on a line parallel to the thread axis.
THSD A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

REP3M6AFS464 Rod End Ball Bearing

Cage 88044

Technical Definition

Bearing, Ball, Rod End, also referenced with federal logistics item name code 00049 - A special single or multiple-row ball bearing, rigid or self-aligning, and constructed with either a solid or hollow shank, internally or externally threaded.

Technical Characteristics

Alignment Type (AGZA):
Self-aligning
Bearing Seal Type (AGYW):
Contact
Bore Diameter (ABXV):
0.1897 inches minimum and 0.1900 inches maximum
Material (MATT):
Plastic polytetrafluoroethylene seal
Material (MATT):
Steel comp e52100 inner ring
Nominal Thread Size (CQJX):
0.375 inches
Outer Ring Width (AGVT):
0.3920 inches minimum and 0.4070 inches maximum
Inner Ring Width (AGVU):
0.4950 inches minimum and 0.5000 inches maximum
Length From Bore Center To Shank End (AGXH):
2.0210 inches minimum and 2.0410 inches maximum
Lubrication Material Document And Classification (LMDC):
Mil-g-81322 mil spec single material response
Lubrication Material (ADZG):
Grease
Material Document And Classification (MDCL):
Ams 3652 assn std single material response seal or ams 3666 assn std single material response seal
Material Document And Classification (MDCL):
Mil-s-7420 mil spec single material response inner ring
Seal Quantity (AGYJ):
2
Self-alignment Location (AHAW):
Internal
Self-alignment Angle (CTLK):
10.00 degrees nominal
Shank Diameter (AAZE):
0.3750 inches nominal
Shank Thread Length (AGGY):
1.2820 inches minimum and 1.3440 inches maximum
Shank Style (AAZF):
Externally threaded
Overall Length (ABHP):
2.5050 inches minimum and 2.5250 inches maximum
Overall Outside Diameter (ADGA):
0.9590 inches minimum and 0.9790 inches maximum
Special Features (FEAT):
Heat stabilized for operation at 250 deg fah
Style Designator (STYL):
Double row, staggered, ball
Surface Treatment Document And Classification (STDC):
Qq-p-416,ty 1,cl 2 fed spec single treatment response outer ring
Surface Treatment Document And Classification (STDC):
Qq-p-416,ty 1,cl 2 fed spec single treatment response shaft
Surface Treatment (SFTT):
Cadmium outer ring
Surface Treatment (SFTT):
Cadmium shaft
Thread Class (AAJD):
3a
Thread Direction (AAJF):
Right-hand
Thread Quantity Per Inch (CMLP):
24
Thread Series Designator (THSD):
Unjf

National Stock Number (NSN)

3110-00-001-4707