NSN A-17993

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

included dial mounting facilities, 2 component quantity, steel corrosion resisting material, support handle component name, antennas,waveguides,and related equipment fsc application data.

NSN 5965-01-347-5878 Datasheet

(NSN) National Stock Number

5965-01-347-5878

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5965 - Microphones and Speakers Handsets Headsets

(NIIN) National Item Identification Number

01-347-5878

Requires Demilitarization

Yes

(INC) Item Name Code

08083

Date

Thu, Oct 24, 1991

Schedule B Code

8518903000

Component Name

support handle

Component Quantity

2

Dial Mounting Facilities

included

Fsc Application Data

antennas,waveguides,and related equipment

Material

steel corrosion resisting

Overall Height

9.000 inches nominal

Overall Length

10.000 inches nominal

Overall Width

9.000 inches nominal

Switch Mounting Facilities

included

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0008083

Cross Reference

CAGE Codes

28199

L3 Technologies, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

E - 175.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

55725

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061575

Schedule B & Trade

Schedule B

8518-90-3000

Description

microphone parts, loudspeaker parts, amplifier parts & headphone parts

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76492

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5965-01-347-5878?

   The FSCG of the NSN 5965-01-347-5878 is 5965

2. Does the NSN 5965-01-347-5878 have a Schedule B code assigned?

   Yes, the Schedule B code is 8518903000

3. Does NSN 5965-01-347-5878 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5965-01-347-5878 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5965-01-347-5878 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5965-01-347-5878 was assigned to the Federal Catalog?

   It was assigned 34 years ago, on Thu, Oct 24, 1991