NSN A-522

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

4.5 maximum blank discrimination at specified frequencies per function in decibels, 0.600 inches nominal distance between centerlines of mounting facilities parallel to body width, 0.886 inches maximum body length, 0.484 inches nominal body height, 0.886 inches nominal body width.

NSN 5915-01-178-5701 Datasheet

(NSN) National Stock Number

5915-01-178-5701

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

01-178-5701

Requires Demilitarization

Yes

(INC) Item Name Code

00209

Date

Mon, May 7, 1984

Schedule B Code

8527995030

Body Height

0.484 inches nominal

Body Length

0.886 inches maximum

Body Width

0.886 inches nominal

Discrimination At Specified Frequencies Per Function In Decibels

4.5 maximum blank

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.600 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

0.600 inches nominal

Functional Terminal Type And Quantity

3 pin output

Inclosure Type

hermetically sealed

Insertion Loss At Reference Frequency Per Function In Decibels

4.5 blank

Load Impedance Per Function

10.2 kilohms blank

Mounting Facility Type And Quantity

3 terminal

Overall Height

0.650 inches maximum

Reference Frequency Per Function

32.0 kilohertz blank

Source Impedance Rating Per Function

10.2 kilohms blank

Specified Frequencies Of Discrimination Per Function

31.50 kilohertz blank and 32.50 kilohertz blank

Style Designator

rectangular terminal/terminals on one surface

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000209

Cross Reference

CAGE Codes

59364

Honeywell International Inc. Dba Honeywell International Div Aerospace - Tempe (west Warner Road)

U.s./canadian manufacturers

77068

Allied-Signal Inc Dba Allied-Signal Aerospace Co Electrodynamics Div

U.s./canadian manufacturers

56662

Frequency Selective Networks, Inc. Dba Frequency Selective Networks Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

593 - Motors and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-01-178-5701?

   The FSCG of the NSN 5915-01-178-5701 is 5915

2. Does the NSN 5915-01-178-5701 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-01-178-5701 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5915-01-178-5701 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-01-178-5701 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-01-178-5701 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Mon, May 7, 1984