NSN A02-4120

A rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see door, access (as modified). Excludes:all covers not specifically designed to provide access for the purposes listed above.

110.0 ac at sea level contact voltage rating in volts, breaks before makes each section rear contact switching action, 1.0 amperes resistive load ac at sea level contact load current rating, 28.0 dc at sea level contact voltage rating in volts, 2.0 amperes resistive load dc at sea level contact load current rating.

NSN 5930-00-086-8519 Datasheet

(NSN) National Stock Number

5930-00-086-8519

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-086-8519

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jan 1, 1963

Schedule B Code

8536509020

Contact Load Current Rating

1.0 amperes resistive load ac at sea level

Contact Load Current Rating

2.0 amperes resistive load dc at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

110.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

First Flat Length

0.390 inches minimum and 0.442 inches maximum single actuator

Flat Height

0.213 inches minimum and 0.223 inches maximum single actuator

Individual Section Quantity

3

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.515 inches minimum and 0.547 inches maximum at 5:00 oclock

Nonturn Device Type

tab at 5:00 oclock

Operating Temp Range

-65.0 to 85.0 celsius

Overall Height

1.891 inches maximum

Overall Length

2.521 inches minimum and 2.553 inches maximum

Overall Width

1.641 inches maximum

Pole Quantity

1 each section rear

Shaft Diameter

0.248 inches minimum and 0.250 inches maximum single actuator

Shaft Flat/Slot Angular Location

240.0 degrees from nonturn device single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.709 inches minimum and 0.741 inches maximum single actuator

Special Features

1 dummy terminal on rear of each sect

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

10 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Test Data Document

13499-259-1588-00 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Thread Class

2a single mounting facility

Thread Length

0.234 inches minimum and 0.266 inches maximum single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

9 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

76854

Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch

U.s./canadian manufacturers

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

82104

Standard Gribsby Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-086-8519?

   The FSCG of the NSN 5930-00-086-8519 is 5930

2. Does the NSN 5930-00-086-8519 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-086-8519 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-086-8519 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-086-8519 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-086-8519 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963