NSN A1-44077D

A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes:flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. Excludes:disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

4.97 inches minimum and 5.03 inches maximum center section width, 6.900 inches nominal center section height, 0.245 inches minimum and 0.255 inches maximum center section thickness, spaceradar end item identification, 90.0 degrees nominal first leg angle.

NSN 5340-01-623-7428 Datasheet

(NSN) National Stock Number

5340-01-623-7428

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-623-7428

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Wed, Nov 27, 2013

Center Section Height

6.900 inches nominal

Center Section Thickness

0.245 inches minimum and 0.255 inches maximum

Center Section Width

4.97 inches minimum and 5.03 inches maximum

End Item Identification

spaceradar

First Leg Angle

90.0 degrees nominal

First Leg Distance From Edge To Hole Center Along Width

1.00 inches nominal

First Leg Hole Arrangement Style

two holes

First Leg Distance Between Hole Centers Along Length

1.97 inches nominal

First Leg Distance Between Hole Centers Along Width

2.50 inches nominal

First Leg Distance From Edge To Hole Center Along Length

1.47 inches minimum and 1.53 inches maximum

First Leg Style

square

First Leg Thickness

0.245 inches minimum and 0.255 inches maximum

First Leg Width

4.97 inches minimum and 5.03 inches maximum

First Leg Hole Diameter

2.22 inches minimum and 2.28 inches maximum

First Leg Length

5.75 inches minimum and 5.81 inches maximum

Hole Quantity

3

Material Document And Classification

sae ams6345b assn std 1st material response and ams6395f assn std 2nd material response

Material

steel comp 4130 or steel comp 4140

Mounting Hole Type

plain and threaded

Part Name Assigned By Controlling Agency

bracket, outrigger assembly

Second Leg Angle

90.0 degrees nominal

Second Leg Hole Arrangement Style

one hole

Second Leg Hole Diameter

2.22 inches minimum and 2.28 inches maximum

Second Leg Distance From Edge To Hole Center Along Length

3.44 inches minimum and 3.50 inches maximum

Second Leg Distance From Edge To Hole Center Along Width

2.50 inches nominal

Second Leg Thickness

0.245 inches minimum and 0.255 inches maximum

Second Leg Width

4.97 inches minimum and 5.03 inches maximum

Second Leg Length

5.75 inches minimum and 5.81 inches maximum

Second Leg Relationship To First Leg

not identical

Second Leg Style

square

Special Features

second hole on the first leg is smaller with a 0.1590 inch diameter, that has 10-32 unc-2b threading. assembly consists of: (1) bracket, u channel p/n: a1-44077d-1, (1) washer, reinforcement p/n: a1-44077d-2, (1) pin assembly, locating p/n: 12417258, (1) rod, acme threaded 1.0-10 thd p/n: d1-44079d, (1) nut, hex p/n: us016ag1a002565, (1) lanyard p/n: a3156794-002, (1) double loop hair pin p/n: hair-7db, (1) washer, flat p/n: ms15795-846, (1) tie-down ring p/n: s3711-0003, (1) screw, machine, pan head .1900-32 unf-2a x .312 lg p/n: ms51958-60, (1) ring, retaining p/n: 90905a655, (1) shoulder screw, 10-32 thd self-locking p/n: pat4426, and thread locking compound per mil-s-22473 as required.

Style Designator

adjacent angles

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

14850

Army, United States Department of the Dba Diorectorate of Production Engineering Div Tobyhanna Army Depot

Government departments or units, including military organizations

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-01-623-7428?

   The FSCG of the NSN 5340-01-623-7428 is 5340

2. Does NSN 5340-01-623-7428 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-623-7428 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-623-7428 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-623-7428 was assigned to the Federal Catalog?

   It was assigned 12 years ago, on Wed, Nov 27, 2013