NSN A1104152ISSUE1

An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). Excludes:terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. For items having printed electrical conductor paths, see printed wiring board.

0.297 inches nominal body length, fully inclosed inclosure type, 0.312 inches minimum and 0.317 inches maximum body outside diameter, unable to decode center to center distance between mounting facilities parallel to length, unable to decode center to center distance between mounting facilities parallel to width.

NSN 5950-00-697-9342 Datasheet

(NSN) National Stock Number

5950-00-697-9342

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-697-9342

Requires Demilitarization

Yes

(INC) Item Name Code

00780

Date

Tue, Jan 1, 1963

Schedule B Code

8548900100

Body Length

0.297 inches nominal

Body Outside Diameter

0.312 inches minimum and 0.317 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Inclosure Type

fully inclosed

Mounting Facility Quantity

unable to decode

Mounting Method

unable to decode

Nominal Thread Size

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

4 turret

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Winding Function And Quantity

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000780

Cross Reference

CAGE Codes

14304

L3harris Technologies, Inc. Dba Harris Corp Div Harris Defense Communications

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 5950-00-697-9342?

   The FSCG of the NSN 5950-00-697-9342 is 5950

2. Does the NSN 5950-00-697-9342 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-00-697-9342 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-697-9342 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-697-9342 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-697-9342 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963