NSN A11997

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

10 bolt hole quantity, 3.750 inches nominal aperture width, 6.625 inches nominal aperture length, 2.375 inches nominal center to center distance between bolt holes along width, 2.541 inches nominal center to center distance between bolt holes along length.

NSN 5330-00-452-1069 Datasheet

(NSN) National Stock Number

5330-00-452-1069

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

00-452-1069

Requires Demilitarization

Yes

(INC) Item Name Code

04522

Date

Fri, Feb 18, 1972

Schedule B Code

4016930000

Aperture Length

6.625 inches nominal

Aperture Width

3.750 inches nominal

Bolt Hole Quantity

10

Center To Center Distance Between Bolt Holes Along Length

2.541 inches nominal

Center To Center Distance Between Bolt Holes Along Width

2.375 inches nominal

Cross-Sectional Shape Style

solid single or composition

Cross-Sectional Thickness

0.062 inches nominal

Hole Diameter

0.375 inches nominal

Material

unable to decode

Outside Edge To Bolt Hole Center Distance Along Length

0.500 inches nominal

Outside Edge To Bolt Hole Center Distance Along Width

0.500 inches nominal

Overall Length

8.625 inches nominal

Overall Width

5.750 inches nominal

Style Designator

non-circular

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0004522

Cross Reference

CAGE Codes

05584

Autodyne Manufacturing Co Inc

U.s./canadian manufacturers

0HBC0

Design Integrated Technology, Inc.

U.s./canadian manufacturers

95335

Atlantic Research Corp

U.s./canadian manufacturers

D9182

Zf Industrieantriebe Witten Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Schedule B & Trade

Schedule B

4016-93-0000

Description

gaskets, washers and other seals, of vulcanized rubber other than hard rubber

End Use

12750 - Industrial rubber products

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

62999

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5330-00-452-1069?

   The FSCG of the NSN 5330-00-452-1069 is 5330

2. Does the NSN 5330-00-452-1069 have a Schedule B code assigned?

   Yes, the Schedule B code is 4016930000

3. Does NSN 5330-00-452-1069 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-00-452-1069 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5330-00-452-1069 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-00-452-1069 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Fri, Feb 18, 1972