NSN A1669-201

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

early warning radar end item identification, cobra radome repair kit part name assigned by controlling agency.

NSN 1560-01-526-0161 Datasheet

(NSN) National Stock Number

1560-01-526-0161

(FSG) Federal Supply Group

15 - Aerospace Craft and Structural Components

(FSC) Federal Supply Classification

1560 - Airframe Structural Components

(NIIN) National Item Identification Number

01-526-0161

Requires Demilitarization

Yes

(INC) Item Name Code

50073

Date

Fri, Dec 3, 2004

Schedule B Code

8803909060

End Item Identification

early warning radar

Part Name Assigned By Controlling Agency

cobra radome repair kit

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0050073

Cross Reference

CAGE Codes

15175

Cpi Essco Inc

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 1560-01-526-0161?

   The FSCG of the NSN 1560-01-526-0161 is 1560

2. Does the NSN 1560-01-526-0161 have a Schedule B code assigned?

   Yes, the Schedule B code is 8803909060

3. Does NSN 1560-01-526-0161 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 1560-01-526-0161 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 1560-01-526-0161 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 1560-01-526-0161 was assigned to the Federal Catalog?

   It was assigned 21 years ago, on Fri, Dec 3, 2004